1. <tr id="cj2yu"></tr>
      <pre id="cj2yu"></pre>
    2. <acronym id="cj2yu"><optgroup id="cj2yu"><rt id="cj2yu"></rt></optgroup></acronym>
      <video id="cj2yu"><bdo id="cj2yu"></bdo></video>
    3. <tr id="cj2yu"></tr>
    4. <tr id="cj2yu"></tr>
      <pre id="cj2yu"><optgroup id="cj2yu"></optgroup></pre>

      <tr id="cj2yu"></tr>

      產品分類

      產品展示

      您的位置是: 首頁 » 產品中心 »  其他類地板產品展示

      金華廠房耐磨環氧地坪
        詳細介紹

      適用范圍
      倉庫、碼頭裝卸區、機械工廠、飛機停機坪、車庫、停車場、油料庫、通道地面、工礦溜槽、橋面、水庫溢洪道、消能池、裝卸斜坡、軍工企業、紡織業、冷凍車房、汽車工業、電子工業、高速公路等適合金屬骨料要求的混凝土地面。
      APPLlCATlON
      For floors where adrasion and impact resistance as well
      asdust-proof are required such as for shed, Loading area at port. Machinery industry, Aircraft parking apron, Garage, Parking area, Oil storage plant,Pathway floor, Mine chute, Bridge surface, Reservoir overflow relief channel, Energy consumption, Loading slope, Military industry, Weaving mills, Cold storage
      plant, Automobile industry in dustry, Electronic industry, Express highway, Etc.
       
      性能特點
      竣工后的金屬骨料耐磨地坪具有以下特性:The finished metal aggregate floor features with the following
       
      1、極高耐磨性;          1、Extremely high wear resistance;        
      2、永久抗蝕性;          2、Permanent anti corroseon;
      3、減少灰塵;            3、Dust-proof;
      4、耐沖性;              4、lmpact resistance;
      5、防靜電、不發火;      5、Anti static electricity and no spark;
      6、施工方便。            6、Vevy easy to construct, and maintain.
       
       
      施工工藝
      1、在找平層整平未干時,將骨料均勻地撒布在找平層上;
      2、地面磨平;
      3、在適當的位置鋸開混凝土,做伸縮縫,并添滿所需填縫料;
      4、養護硬化地面。
      PROCESSING
      1、Before the flattened layer is dry, spread the aggregate agent evenly;
      2、Leveling ground;
      3、Saw the ciment at proper place into a fissure and fill it up with fillers;
      4、Maintaining the hardened ground.
       
      使用年限
      與混凝土地面同步。
      SERVICELIFE
      As long as the concrete.
       
      技術指標  TECHNlCAL lNDEX
       
      項目 lTEM
      指標 lNDEX
      金屬骨料Metal aggregate
      耐磨性(磨坑法)Wear resistant,ml
      ≤450
      抗壓強度Pressive strength,Mpa
      3d
      ≥50
      7d
      ≥65
      28d
      ≥90
      抗折強度Bending strength,Mpa
      ≥13.5
      抗拉強度Tensile strength,Mpa
      3.9
      硬度,莫式Hardness
      8.0±0.5
      耐油性Oil-proof
      油泡三年強度不降低,油滲<0.3mm。(包括坑滲性)The strength will not be any lower after it is sonaked in oil for 3 years. Oil penetration is smaller
      than 0.3mm.(lncluding anti penetration
      抗繡蝕性Anti-corrosion
      骨料標準鹽蝕試驗,42d自然電位恒為正穩定值+50mm(S.C.E).最大值+120mv(S.C.E)。水泥試體,5%NaCl溶液浸泡,2年零3個月銹斑。
      Standard salt corrosion test
      for aggregate:42d natural
      potential consistence is positive and stability value is +50mv(S.C.E),Cement test body is soaked in 5%
      NaCl solution for two years and 3 months, There is no
      Corrosion and no humid
      Expansion crack…
      防滑性Anti-slip
      同于一般水泥地面
      Same as ordinary cement floor

      91超碰在线