產品特點

采用進口丙烯酸類共聚物、鈦白粉、助劑和水制成環保高檔工程內墻啞光涂料。用于內墻和工程施工，能起到較好的裝飾和保護功能。產品具有遮蓋力強、白度特佳、附著力好、施工方便、干燥速度快等優點。

FEATURE

Adopt imported acrylic copolymer, titanium dioxide, assistant and water to produce interior matt paint of environmental protective high-end engineering which is used for the construction of interior woll and project with the function of good decoration and protection. The product has the characteristics of strong hidign power,excellent whiteness, good adhesion, Convenient

construction and rapid drying rate.

適用范圍

適合工程驗收內墻、普通裝飾性和室內天花的涂裝。在各類批灰、混凝土、磚石、石膏板膩子、抹灰層構成基面比較適合。

APPLlCATlON

Application of work for the coating of interior wall,ordinary decoration and indoor ceiling.Be suitable for the base plane composed by plaster,concrete, masonry,putty of gypsum board and plaster layer.

主要技術指標

最短覆涂間隔：2h   表干時間：≤1h

耐堿性：（24h）無異常   耐擦洗性：＞1500次

對比率：＞0.94

Main technical parameter

The shortest coting interval:2h

Surface drying time:=1h

Alkali resistance:(24h)normal

Scrubbability:＞1500 times

Contrast ratio:＞0.94

使用說明

1、基材含水率小于10%，PH值小于是10。

2、應在被涂表面及環境溫度高于5℃，相對濕度低于85%的條件下施工。

3、施工方式：刷涂、輪涂、噴涂等。

4、稀釋比例：視具體情況定，最多不超過30%。

5、漆量：8-10㎡/kg/遍。

lNSTRUCTION :

1、Moisture content of the substrate should be less than 10%, and the PH value should be less than 10.

2、The temperature of coated surface and environment should be above 5℃, and the relative humidity should be less than 85%.

3、Construction method:brush painting,roller painting and spray painting.

4、Dilution ratio:depending on the specific circumstance, less than 30% at most.

5、Painting volume:8-10㎡/kg/time

配套建議  SUGGESTlON FOR SETTlNG

底漆:通用水性白色封墻底漆1遍.    Primary coat:catkin water-based white close wall primer once

面漆:內墻面漆2遍.                   Top coat:interior top coat twice